- Fused cast AZS brick 33#
- Fused cast AZS brick 36#
- Fused cast AZS brick 41#
- ¦Á-¦Â corundum product
- ¦Â corundum product
- Fused Calcia Stabilized Zirconia
- Electrocast Monoclinic Zirconia
- Magnesia Stabilized Zirconia
- Yttria Stabilized Zirconia
- Yttria-Zirconia
- Magnesia-Zirconia
- Desilicate Zirconia
- Electrofusion Zirconia Corundum M
- Zirconia Composite Silcon Powder
- Fused Yttria
- High-Temperature Additive
- Wear-Resistance Brick
- ¦Á corundum product
Fused cast AZS brick 33#
The cast method and application of AZS series products
After the material is melted completely, it is then cast into the mould, to cool and curdle. Special attention during the condensation process, due to volume constriction, cavities appears. The AZS¡¯s cast methods are Regular Cast, Tilt Cast, Void Free Cast and End Cast. Varied cast method of AZS products are chosen to meet the different requirements for glass kiln parts.
|
Code |
Name |
Characteristic and Use |
|
PT |
Normal Cavity |
It is the accustomed cast method and cavities are located under the mouth of casting. It is used for top of thawy pool, etc. corrasive non- severity part. |
|
QX |
Oriented Cavity |
Using tilt cast method, and the cavities of goods are located under the good¡¯s part. Being used for sidewall. |
|
WS |
Cavity Free |
It is resect cavities part of molten brick and the main using is hole of stream liquid kiln and sidewalls corner, etc corrasive severity part. |
|
ZWS |
Reduced Cavity |
It is similarly void free cast and basically resect cavities part. Being used for sidewalls brick. |
Chemical Composition(%) AZS - 33 ZrO2 ¡Ý 32 SiO2 ¡Ü 16.0 Al2O3 Remains Na2O ¡Ü 1.5 Fe2O3 + TiO2 ¡Ü 0.30 Physical Properties ¡ª Volum density 3.7 Cold crushing strength (Mpa) 350 Exudation Temp. of glass phase £¨¡æ£© 1400 Corrosion Resistance to glass melt £¨ mm/24hr £© 1.6 Bulk density (g/cm3 ) PT QX 3.4 WS / ZWS 3.6/3.55 Crystalline hpase composition(%) ¡ª Baddeleyite 32 Glass phase 212 1 21AZS - 33 ¦Á-Corundum 47